Furnish all labor, material, equipment, incidentals, supervision and transportation for work necessary to provide Replace Roof on Bldg 1540. All work shall be performed in accordance with the contract specifications, manufacturer’s recommendations, and state building codes. The work includes, but is not necessarily restricted to, the following items. Removal of existing roofing material Install of… Read more »
Custom Tag: roofing
Ivor Dental Roof Repair
All pipes cleaned, patched and flashed. 120 LF of damaged stripping covered with new EPDM. Front Porch roof cleaned and coated. New coping fabricated and installed around the perimeter of main building. New piece of metal installed at transition of porch roof and main roof.
CDI Marine Roof Repair
Investigation and repairs to the perimeter of the roof. Roof membrane at perimeter, Coping laps and penetrations were sealed with one part liquid applied flashing.
Cape Henry Multiple Buildings Roof Replacements
Description: Removal and reinstallation of shingle roofs and all associated flashing and perform asbestos abatement where needed at Quarters B and Quarters C. New standing seam roofs and flashing were installed after the existing shingles were removed at OU1, OU2 and OU3. New standing seam roofs and associated flashings were installed at OG1, and OI1. The existing roof… Read more »
Waterside District
Description: Removed existing EPDM and installed new tapered TPO roof system. Removed existing roof panels and reinstalled new panels to match. Installed a modified metal roof on the south side of the building to accommodate signage for water vessel patrons.
Hilton 31st Street
Description: Clean, prime, and coat with a Henry silicone product to existing granulated cap sheet.
Old Forge
Description: Removal of existing shingles down to the wood sheathing and replace deteriorated wood. Installation of ice and water shield, 30 lb felt paper, and 30-year GAF Architectural shingles. Installation of new vents and pipe boots, and a fully adhered single ply membrane roof over low slop roof back to prevent water leaks from debris… Read more »
SP-367 Roof Replacement
Description: This project included replacing the existing built-up roofing system on high and low roof areas including rigid insulation, wall and equipment flashings, roof drain strainers and clamping rings, gutters and downspouts with a fully adhered modified bitumen roofing system, and a tapered system on one area of the low roof. The existing materials contained asbestos and were… Read more »
Beach Quarters Roof Replacement
Description: This project included the removal of the existing roof down to existing deck, and disposal of properly off site. TST Roofing install 2ply modified bitumen roof and all associated flashings as specified by The Garland Company. The existing high wall EPDM flashing and coping to remain, and TST Roofing installed a new reflective coating system… Read more »
SDA-211 Roof Replacement
Description: This work includes a roof replacement at SDA-211, a single-story warehouse in the DLA warehouse district that has a low-slope high-bay roof flanked by two lower bay roofs along the long axis of the facility. Since its initial construction in the 1940s, the facility roof has been replaced several times, the most recent which… Read more »
Recent Comments